论文类型：期刊论文
论文编号：201
第一作者：Zhenhua Liu Wenchao Xu Zining Hou,Zhigang Wu
通讯作者：Zhigang Wu
合写作者：Zhenhua Liu 1, Wenchao Xu 1, Zining Hou 1,Zhigang Wu 1,2,*
发表刊物：micromachines
收录刊物：SCI
学科门类：工学
一级学科：机械工程
项目来源：湖北省自然科学基金No.2015CFA110；国家自然科学基金No.51575216；
文献类型：J
卷号：7
期号：11
页面范围：1-13
ISSN号：2072-666X
关键字：prototyping technique; microfluidics; soft lithography; ultraviolet (UV) laser direct writing
发表时间：2016-11-08
摘要：In microfluidic device prototyping, master fabrication by traditional photolithography is expensive and time-consuming, especially when the design requires being repeatedly modified to achieve a satisfactory performance. By introducing a high-performance/cost-ratio laser to the traditional soft lithography, this paper describes a flexible and rapid prototyping technique for microfluidics. An ultraviolet (UV) laser directly writes on the photoresist without a photomask, which is suitable for master fabrication. By eliminating the constraints of fixed patterns in the traditional photomask when
发布期刊链接：http://www.mdpi.com/2072-666X/7/11/201